▸ Soporte técnico

Consulte nuestras guías de configuración y las preguntas frecuentes, o utilice el cuadro de búsqueda debajo para mayor información

Setup: macOS

Introduction

The easiest way to set Quad9 on your entire network is via your router settings. If you'd prefer to set Quad9 on a single system, please follow the steps below to configure macOS to use Quad9.

Step 1

On your Mac, choose the Apple menu > System Preferences, then select Network. step_1edit.png

Step 2

Click Advanced and then select the DNS tab. From the DNS tab, select the "+" symbol.
step_2edit.png
Note: If you have any other DNS providers configured, you will want to first select their servers and then select the "-" symbol to remove them before adding our service. remove_google.png

Step 3

Enter the Quad9 IP addresses of your preferred service and select OK.

9.9.9.9
149.112.112.112


macOS_IPv4_both_1_.png If your network/computer support IPv6, it's also recommended to configure the Quad9 IPv6 addresses. If you're not sure if IPv6 is configured on your network, you can test that here: https://test-ipv6.com/

2620:fe::fe
2620:fe::9

macOS_IPv6_both_cropped.png

Step 4

Select Apply. You are now using Quad9. Confirm you're using Quad9.

step_4edit.png